Outdoor to guide to the large screen
Product profile
The outdoor guide screen is composed of high brightness LED module, drive circuit, bracket and other parts. It is installed at each entrance of the parking lot to display the number of remaining parking Spaces in the current parking lot in real time, and is used 24 hours a day.
Product features
1) The guide screen adopts plexiglass panel + galvanized steel sheet spray shell, with simple and atmospheric appearance;
2) The shell is waterproof and dustproof design, and the use of ultraviolet resistant external paint, not easy to change color;
3) The guide screen has short circuit, overvoltage, overcurrent and overload protection;
4) The red and green double-color instructions are clearly discernible, with high luminous intensity, far visual distance and wide perspective;
5) The text part adopts laser cutting process, embedded with light transmission plate and light box, and the night vision effect is good;
6) The number of warnings can be customized, showing green when the number of warnings is greater, and red when the number of warnings is smaller.
Technical Parameters
| model: | WBP-VA3N-3 | working voltage: | AC 110～240V |
| size: | 2000*750*140mm | working temperature: | -30℃ ~ +75℃ |
| levels of protection: | IP65 | ambient humidity: | 90% RH (no condensation) |
| Supports the display number | Three or four | power dissipation: | 70 W (3 layers) |
| illuminant: | Red / green highlighted LED | communication mode: | RS485, Ethernet optional |
| Appearance material: | Galvanized steel sheet spray plastic + white PC + Plexiglass panel | communication distance: | ≤ 300m，TCP/IP≤1 00 m |
Product installation
The outdoor guide screen is fastened with screws. The embedded plate, anchor screw (M12 * 350) and PVC thread pipe (Φ 20) are embedded in 1000 * 1000 * 1000mm cement pier. After natural solidification, the outdoor guide screen can be fixed to the anchor screw.
Use and maintenance
1) Non-system maintenance personnel shall not operate the system equipment at will to prevent misoperation and cause system failure.
2) After the system configuration file is completed, please make a backup to prevent it cannot be restored after damage and reduce the maintenance workload.
3) When replacing the faulty equipment, please disconnect the power of the equipment and operate to prevent the equipment from burning during the operation.
4) When the system cannot work normally, please check the power supply of each equipment first and whether it is mistakenly turned off.